MTK Scatter File Explained: What It Is and How to Use It
An MTK scatter file is a small text file, named like MT6765_Android_scatter.txt, that comes inside MediaTek firmware. It tells SP Flash Tool where each partition starts on the phone’s storage, how big it is and which image file belongs in it. It contains no firmware itself, so it only works together with the image files from the same package.
What Is an MTK Scatter File?
Think of the scatter file as a map of the phone’s storage. Each entry describes one partition: its name, the image file for it, its start address and its size. When you flash, SP Flash Tool writes each file starting at the address in the map and checks that the file is not bigger than the partition. When you do a readback (backup), it reads the full size given in the map.
The file name starts with the chip’s platform number, such as MT6580 or MT6765, followed by _Android_scatter.txt. Scatter files are used by SP Flash Tool v5. Newer firmware for SP Flash Tool v6 uses a flash.xml file instead, and there is no supported way to convert one format into the other. If your firmware has flash.xml, follow our SP Flash Tool v6 guide instead.
Why the exact scatter file matters
Two phones with the same chip can use a different partition layout and a different preloader. A scatter file from another model can point the tool at the wrong addresses. That is why you should only use the scatter file that came with the official firmware for your exact model and variant.
What Is Inside a Scatter File
A scatter file is plain text, so you can open it in Notepad to read it. Here is a shortened example from an MT6739 phone:
- general: MTK_PLATFORM_CFG
info:
- config_version: V1.1.6
platform: MT6739
storage: EMMC
boot_channel: MSDC_0
block_size: 0x20000
- partition_index: SYS32
partition_name: super
file_name: super.img
is_download: true
type: NORMAL_ROM
linear_start_addr: 0x21000000
physical_start_addr: 0x21000000
partition_size: 0x80000000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
The general block
The first block describes the device: the file format version (config_version), the chip (platform), the project name and the storage type, such as EMMC. If the platform does not match your phone’s chip, the file is for a different device.
The partition entries
| Field | What it means |
|---|---|
| partition_index | The entry number, such as SYS0, SYS1 and so on. |
| partition_name | The partition, for example preloader, recovery, super or nvram. |
| file_name | The image file that goes into it. NONE means there is no image in the package. |
| is_download | true if the tool may write this partition, false if it is skipped. |
| type | The image type, such as SV5_BL_BIN for the preloader or NORMAL_ROM for normal images. |
| linear_start_addr / physical_start_addr | Where the partition starts, in hexadecimal. In most files both values are the same. |
| partition_size | The size of the partition, in hexadecimal. |
| region | The storage area, such as EMMC_BOOT_1 (where the preloader lives) or EMMC_USER (the main storage). |
| operation_type | A group label such as BOOTLOADERS for the preloader or UPDATE for normal images. |
MediaTek does not publish public documentation for every field, so treat the file as something you read, not something you change.
Partitions to treat with care
- preloader: the first-stage boot loader, stored in the EMMC_BOOT_1 area. Do not flash it just because it appears in the list. Flash it only when exact recovery instructions for your model call for it.
- nvram and nvdata: Hovatek warns that formatting can damage NVRAM/NVDATA and remove the radio configuration, which usually breaks SIM detection and network signal.
- Lines with file_name: NONE: partitions such as pgpt or proinfo that have no image in the package. They are normally set to
is_download: false, so leave them that way.
Requirements
- Official firmware for your exact model and variant, with its scatter file and image files in one folder.
- SP Flash Tool v5. See our SP Flash Tools for all MTK devices page.
- The MediaTek USB VCOM driver from our MTK USB Driver 32bit & 64bit post.
- A backup of your data. Flashing official firmware usually erases the phone.
How to Load a Scatter File in SP Flash Tool
- Extract the firmware to a short folder path. Keep the scatter file in the same folder as the image files, and do not rename it.
- Open SP Flash Tool v5 and go to the Download tab.
- Click the Scatter-loading button (labelled Choose in some builds) and select the MTxxxx_Android_scatter.txt file.
- Check the partition list that appears. Every ticked line should show a file path in the Location column.
- Untick any ticked line whose location is empty. Untick preloader as well unless you are sure the firmware is for your exact model.
- Select Download Only. Avoid Format All + Download.
- Click Download, then connect the switched-off phone. Wait for the green Download OK message before you unplug it.
For the complete v5 flashing steps and a v5 download, see our SP Flash Tool v5.1820 page.
Do not edit or swap scatter files
Changing addresses or sizes, or using a scatter file “for the same chip” from the internet, is a common way to damage a working phone. Technicians sometimes build a scatter file from a phone’s own partition map to back it up, but that file describes only that one phone. For flashing, use the scatter file from the official firmware and nothing else.
Common Scatter File Errors
| Error | Likely cause | What to do |
|---|---|---|
| Initialize scatter file failed. Please check the scatter file name you load is legal (8417) | The name or the format is not accepted | Use the original file name. Make sure nothing was added above the General Setting header at the top. Try a newer v5 build. |
| S_FTHND_FILE_IS_NOT_LOADED_YET (5007) | A partition is ticked but has no file | Keep the scatter file with the images, and untick lines with no file. |
| S_FT_GET_MEMORY_FAIL (4058) | The tool cannot find a partition you selected | Untick every line with a blank Location. |
| Error 3168 (chip type does not match) | The scatter file does not match the phone | Download the firmware for your exact model. |
| Error 8038: pmt is ready and layout has been changed | The phone’s partition layout differs from the file | Make sure the firmware is for your model. Hovatek suggests Firmware Upgrade mode, which erases user data. |
| Wrong format when loading | You used SP Flash Tool v6 | Use v5 for scatter files. v6 only loads flash.xml. |
For other BROM and DA errors, see our MTK SP Flash Tools error guide and the fix for S_BROM_DOWNLOAD_DA_FAIL (error 2004).
Related Guides
- SP Flash Tools For All MTK Device Latest Version
- SP Flash Tool v6: How to Use the New Version with flash.xml
- MTK USB Driver 32bit & 64bit
- MTK SP Flash Tools All Error Solution
- SP Flash Tool Download MTK Flash Tool V5.1820.0
FAQ
Where do I get the scatter file for my phone?
It is inside the official firmware package for your model. Do not download a scatter file on its own from a random website, because it may be for a different model or variant.
Can I use a scatter file from another phone with the same chip?
No. Phones with the same chip can have different partition layouts. Use only the file that came with your model’s firmware.
Does SP Flash Tool v6 use a scatter file?
No. v6 loads flash.xml from the firmware’s download_agent folder. Scatter files are for v5.
What does “is_download: false” mean?
SP Flash Tool will not write that partition. These lines often have file_name: NONE because the firmware package has no image for them.
Can I edit a scatter file in Notepad?
You can open it to read it, but do not change addresses or sizes. A wrong value can make the tool write data in the wrong place on the phone.
https://droid-developers.com/mtk-scatter-file-explained/https://droid-developers.com/wp-content/uploads/2026/11/mtk-scatter-file-explained-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/mtk-scatter-file-explained-featured-150x150.jpgFirmwareFlash ToolsHow ToAn MTK scatter file is a small text file, named like MT6765_Android_scatter.txt, that comes inside MediaTek firmware. It tells SP Flash Tool where each partition starts on the phone's storage, how big it is and which image file belongs in it. It contains no firmware itself, so it only...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-Developers
Leave a Reply