MTK USB Driver for Windows 11: VCOM and Preloader Install Guide
The MTK USB driver for Windows 11 is the MediaTek VCOM driver that lets flashing tools such as SP Flash Tool talk to a switched-off MediaTek phone through its Preloader or BootROM port. MediaTek has published a signed version of this driver for “Windows 10 and later” in Microsoft’s own Update Catalog, so you do not need a driver from an unknown website. This guide shows how to install it, how to check that it works, and how to fix the errors Windows 11 shows most often.
What the MTK USB Driver Does
When you connect a MediaTek phone that is switched off, it does not show up as a normal phone. For about a second it opens a special USB serial (COM) port that flashing tools use. Windows needs the MediaTek VCOM driver for that port. Without it, the phone simply starts charging and the flash tool never sees it.
You do not need this driver to copy photos or files. For that, choose File Transfer in the phone’s USB notification. ADB (USB debugging) also uses a different driver, which our Android USB driver for Windows 11 guide covers.
MediaTek Ports You May See in Device Manager
| Device Manager name | Hardware ID | When it appears |
|---|---|---|
| MediaTek PreLoader USB VCOM (Android) | USB\VID_0E8D&PID_2000 | The usual port when a switched-off phone is connected. It stays only about a second unless a tool starts talking to it. |
| MediaTek USB Port | USB\VID_0E8D&PID_0003 | BootROM (BROM) mode. On many phones you reach it by holding one or both volume keys while connecting the switched-off phone. The key combination varies by model. |
| MediaTek DA USB VCOM (Android) | USB\VID_0E8D&PID_2001 | Used during the Download Agent (DA) stage of flashing. |
The names and hardware IDs come from MediaTek’s driver entries in the Microsoft Update Catalog. With the driver installed, these ports normally appear under Ports (COM & LPT).
Requirements
- A Windows 11 PC with administrator rights. MediaTek’s catalog package lists only x86 and AMD64 (x64). We found no ARM64 version for Windows on Arm laptops.
- A USB data cable. Google warns that not all USB cables can transfer files. Plug it straight into the PC, not into a hub.
- A charged phone. At least 50% is a safe level before any flashing.
- Your flash tool and firmware. Most MediaTek firmware is flashed with SP Flash Tool. See our SP Flash Tool v6 guide to choose between v5 and v6.
- No old, conflicting MediaTek drivers. If the flash tool still cannot detect the phone, Hovatek’s driver tutorial advises removing all MediaTek drivers and installing the VCOM driver again. The error section below shows how.
Where to Get the Driver
We could not find a public MediaTek download page for this driver. The MediaTek link on Google’s OEM USB drivers page now redirects to a MediaTek login page (we checked on 13 November 2026). Two safer options remain:
| Source | What you get |
|---|---|
| Microsoft Update Catalog | MediaTek Inc. driver version 3.0.1504.0, listed for “Windows 10 and later drivers”. The PreLoader, DA and USB Port entries for Windows 10 and later all download the same small .cab file. |
| Our MTK USB Driver 32bit & 64bit page | The classic all-in-one MTK driver pack in a ZIP file |
The catalog driver is old (version date January 2015), but it comes from MediaTek through Microsoft’s own distribution channel. Avoid “driver updater” programs and random driver mirrors, because you cannot check where their files came from.
Windows 11 Now Blocks Old Cross-Signed Drivers
Since the April 2026 update, Windows 11 24H2, 25H2 and 26H1 no longer trust cross-signed kernel drivers by default. Under the new Windows Driver Policy, only drivers signed through Microsoft’s Windows Hardware Compatibility Program (WHCP), plus a short allow list, can load. The policy first runs in evaluation mode; after 250 hours of uptime and 3 restarts with no untrusted driver loaded, it starts blocking. Old MTK driver packs that are not WHCP-signed may then stop working. If a MediaTek port suddenly stops working, open Event Viewer and check CodeIntegrity > Operational for event ID 3077, which Microsoft uses for a blocked driver. We could not test every MTK driver pack against this policy, including the catalog package.
How to Install the MTK USB Driver on Windows 11
Method 1: Signed Driver from the Microsoft Update Catalog
- Open the catalog search for MediaTek PreLoader.
- Find the row MediaTek Inc. – Other hardware – MediaTek PreLoader USB VCOM (Android) whose Products column says Windows 10 and later drivers. Click Download, then click the .cab link in the window that opens.
- Create an empty folder, for example
C:\MTKDriver. - Open Command Prompt as administrator and extract the .cab into that folder. Replace FILENAME with the name of the file you downloaded:
expand "%USERPROFILE%\Downloads\FILENAME.cab" -f:* C:\MTKDriver
- Add the driver to Windows with PnPUtil, Microsoft’s built-in driver tool:
pnputil /add-driver C:\MTKDriver\*.inf /subdirs /install
This copies the driver package into the Windows driver store and installs it on any matching device. Windows then uses it the next time a MediaTek port appears. Nothing on the phone changes.
Method 2: Driver Pack from Our MTK Driver Page
- Download the ZIP from our MTK USB Driver 32bit & 64bit page and extract it.
- If the folder contains a setup program, right-click it and choose Run as administrator.
- If it only contains .inf files, use the same
pnputil /add-drivercommand shown above with that folder’s path.
Check That Windows 11 Detects the Phone
- Right-click Start and select Device Manager. Expand Ports (COM & LPT).
- Switch the phone off completely.
- Connect the cable and watch Device Manager. MediaTek PreLoader USB VCOM (Android) should appear for a moment, then disappear as the phone starts charging. That is normal.
- If you see Unknown device or a yellow warning icon instead, the driver is not installed. Repeat Method 1.
Because the port closes so quickly, start your flash tool first. In SP Flash Tool, load the firmware, click Download, and only then connect the switched-off phone.
Common Errors and Fixes on Windows 11
The Phone Connects and Disconnects, or the Tool Waits Forever
- Make sure the flash tool is already waiting before you plug in the phone.
- Some phones only connect while you hold Volume Up, Volume Down or both as you plug in the cable.
- Try another data cable and another USB port directly on the PC.
- Charge the phone if the battery is very low.
Code 52: Windows Cannot Verify the Digital Signature
The driver you used is not properly signed. Microsoft’s fix is to install a current driver from the manufacturer, so use the signed catalog driver from Method 1. Windows does have a Disable driver signature enforcement option (number 7 in Startup Settings), which allows improperly signed drivers to be installed. We do not recommend it, because it lowers your PC’s protection. Microsoft also notes that on an encrypted PC you need your BitLocker key to use Startup Settings.
“A driver can’t load on this device”
This comes from Windows 11’s Memory integrity protection, which is blocking a driver. Microsoft’s first advice is to look for an updated, compatible driver through Windows Update or the maker. Turning off Memory integrity (Windows Security > Device security > Core isolation details) makes the PC less secure, so treat it as a last resort.
Code 28 or Code 10
Code 28 means “The drivers for this device are not installed.” Code 10 means the device cannot start. For both, Microsoft suggests updating or reinstalling the driver. Install the driver with Method 1, then reconnect the phone.
Old MediaTek Drivers Are Conflicting
List the third-party drivers installed on the PC:
pnputil /enum-drivers
Look for entries whose provider is MediaTek and note their published name, such as oem12.inf (yours will differ). Remove one with the command below, then install the driver again with Method 1. Warning: check the name carefully. Removing the wrong oem file removes the driver for another device on your PC.
pnputil /delete-driver oem12.inf /uninstall
The Tool Asks for an Authentication File
This is not a driver problem. Many newer MediaTek phones use secure boot and need a signed auth file for that model. Our SP Flash Tool v6 guide explains this. If your official firmware does not include one, an authorized service centre can flash the phone.
Related Guides
- MTK USB Driver 32bit & 64bit
- SP Flash Tool v6: How to Use the New Version with flash.xml
- MTK SP Flash Tools All Error Solution
- MTK S_BROM_DOWNLOAD_DA_FAIL (ERROR 2004) Solved
- Android USB Driver for Windows 11 (All Major Brands)
FAQ
Do I need the MTK USB driver to copy files from my phone?
No. Unlock the phone, connect it and choose File Transfer in the USB notification. The VCOM driver is only for flashing tools that use the Preloader or BootROM port.
Will installing the MTK driver erase my phone?
No. The driver is installed on the PC only. Flashing firmware afterwards usually does erase the phone, so back up before you flash.
Why does the port disappear after a second?
That is how MediaTek phones behave when switched off. The Preloader port waits very briefly for a flashing tool and then the phone goes back to charging. Start the tool first, then connect the phone.
https://droid-developers.com/mtk-usb-driver-windows-11/https://droid-developers.com/wp-content/uploads/2026/11/mtk-usb-driver-windows-11-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/mtk-usb-driver-windows-11-featured-150x150.jpgDriverFlash ToolsHow ToThe MTK USB driver for Windows 11 is the MediaTek VCOM driver that lets flashing tools such as SP Flash Tool talk to a switched-off MediaTek phone through its Preloader or BootROM port. MediaTek has published a signed version of this driver for 'Windows 10 and later' in Microsoft's...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-Developers
Leave a Reply