Android Screen Black? How to Fix a Black Screen That Won’t Wake
Is your Android screen black even though the phone seems to be on? The usual causes are a frozen system, a fully drained battery or a faulty display. Charge the phone and force a restart first, then use the checks below to find out whether the problem is software you can fix or a screen that needs repair.
Quick Checks: Is the Phone On?
- Make it ring. Call the phone from another phone or use the Find Hub app. If it rings or vibrates, the phone is on and the problem is the display or a frozen system.
- Look closely. Google notes that a very low brightness setting can make the screen hard to read. Check for faint images in a dark room.
- Plug it in and wait a minute. Google says a battery icon means the phone is off and charging, and a red light means the battery is fully discharged.
- Remove the case and screen protector. Google and Xiaomi both suggest this, and also peeling off stickers over the screen or sensors.
- Look for damage. Xiaomi says to inspect the screen for cracks or liquid exposure.
- Only black during calls? That is usually the proximity sensor. See fix 2.
Force Restart Buttons by Brand
A forced restart does not delete anything. These timings come from each maker’s support pages.
| Phone | Buttons | How long |
|---|---|---|
| Samsung Galaxy | Side (Power) + Volume Down together | At least 7 seconds, until the Samsung logo appears and the phone vibrates. For a blank or black screen, Samsung also suggests holding for 20 seconds. |
| Google Pixel | Power | About 35 seconds, then wait about 2 minutes |
| Xiaomi, Redmi, POCO | Power | 10 to 15 seconds |
| Most other Android phones | Power | About 30 seconds, or until it restarts (Google’s general advice) |
On Samsung, if only the volume bar or power menu appears, the two buttons were not pressed at the same time. A case can stop you pressing both properly.
Fixes, From Least to Most Invasive
1. Charge it, then force restart
- Connect a charger and cable you know work, ideally the original ones.
- Leave it on charge. Samsung says the lightning icon may not appear when the battery is completely drained, so keep charging even if the screen shows nothing. For a black screen, Samsung suggests charging for at least one hour after a forced restart. Xiaomi says to wait a few minutes on the charger.
- Force restart with the buttons in the table above, while the phone is still plugged in.
If the screen comes back, the phone probably froze or the battery was empty. If it goes black again, continue with the next fixes.
2. If the screen goes black only during calls
Xiaomi explains that the proximity sensor turns the screen off when the phone is near your face, which is normal. The screen should light up again when you move the phone away. If it stays black:
- Wipe the top of the phone around the sensor with a tissue or cotton cloth. Facial oil can affect it.
- Remove any unofficial screen film or sticker that may cover the sensor.
- On Xiaomi phones, dial
*#*#6484#*#*or*#*#64663#*#*to open the hardware test menu. Choose Proximity sensor and tap Start calibration. Xiaomi notes that some older Redmi models can be tested but not calibrated.
Xiaomi says that if calibration fails, back up your data and restore factory settings, then visit a service centre if the problem remains.
3. Boot into Safe mode to rule out an app
Safe mode turns off downloaded apps. Google says that if the screen works in Safe mode, an app is most likely the cause. You can start Safe mode with the buttons, which helps when the screen is hard to use:
- Samsung: restart by holding Volume Down + Power for 7 seconds. While it restarts, hold Volume Down. “Safe Mode” appears in the lower-left corner.
- Pixel (phone off): press Power. When the animation starts, hold Volume Down until it ends. “Safe mode” appears at the bottom.
- Other brands: Google says the steps vary, so check your maker’s support site.
If the problem disappears, restart normally and uninstall recently downloaded apps one at a time, restarting after each one. Note that Pixel turns on Airplane mode in Safe mode.
4. If the screen keeps going black: update and free up space
If the display returns after a restart but blacks out again, install system and app updates. Google says a phone can start having issues when less than 10% of storage is free, so delete files or apps you no longer need.
5. Black screen after an update or a flash
If the screen went black right after a software update, or after you flashed a ROM, and the phone shows a logo but never reaches the home screen, follow our boot loop guide. To reinstall official firmware, use our guides for Odin on Samsung, Mi Flash Tool on Xiaomi or SP Flash Tool v6 on MediaTek phones. A full flash usually erases all data.
6. Factory reset from Recovery (last resort, erases all data)
Warning: a factory reset deletes all apps and files on the phone. Xiaomi points out that you cannot back up data from Recovery mode, so everything not already saved to the cloud is lost. Google says you can restore data saved in your Google Account afterwards.
Google says a phone that stays blank can be reset using its buttons. On Xiaomi, Recovery has Clear data > Clear all data, although menu names vary by model. The boot loop guide linked above lists the Recovery buttons for Samsung, Pixel and Xiaomi. Only reset if you believe the cause is software. A reset will not fix a broken display.
Back Up Your Data Before Repair
If the phone is on but the screen is dead, you may still reach your files. Samsung says that if you cannot use the touchscreen, you can connect a USB mouse and keyboard through a USB adapter and navigate the phone, or connect it to a monitor to back up your data. You will still need to unlock the phone with your own PIN, pattern or password.
If you plan to copy files to a Windows PC, install the right driver from our Android USB driver guide for Windows 11 first.
When It Is Hardware: Visit a Service Centre
- It rings or vibrates, but the screen stays blank after a forced restart and charging. Google says to contact an authorised repair centre.
- Still black after a factory reset. Xiaomi says to take it to an authorised service centre for inspection.
- Cracks or liquid damage. Xiaomi notes that both can affect the display.
- No light, no vibration and no response after charging and holding Power for more than 10 seconds. Xiaomi treats this as a phone that will not turn on, not a screen fault.
For Pixel repairs, start at store.google.com/repair. For Samsung and Xiaomi, use an authorised service centre in your country.
Related Guides
- Phone Stuck in a Boot Loop? Universal Fixes for Android Phones
- How to Flash Samsung Firmware with Odin (2026 Guide)
- Mi Flash Tool Latest Version: How to Flash a Xiaomi Fastboot ROM
- SP Flash Tool v6: How to Use the New Version with flash.xml
- Android USB Driver for Windows 11 (All Major Brands)
FAQ
Why is my screen black but the phone still vibrates?
The phone is running but the display is not showing anything. Force restart it and charge it. If it still rings with a blank screen, Google says the screen likely needs an authorised repair centre.
Why does my screen go black during calls?
The proximity sensor turns the screen off when the phone is against your face. Xiaomi says this is normal. If the screen stays black after you move the phone away, clean the sensor area and remove any film covering it.
Will a factory reset fix a black screen?
Only when the cause is software, such as a bad app or update. It erases all data and cannot repair a damaged display, so try a forced restart, charging and Safe mode first.
Can I get my photos off a phone with a black screen?
Often yes, if the phone still turns on. Samsung suggests a USB mouse and keyboard or a monitor to control the phone and back it up. Anything synced to your Google Account can also be restored on another phone.
https://droid-developers.com/android-screen-black-fix/https://droid-developers.com/wp-content/uploads/2026/11/android-screen-black-fix-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/android-screen-black-fix-featured-150x150.jpgAndroidHelp & TroubleshootingSoftware FixIs your Android screen black even though the phone seems to be on? The usual causes are a frozen system, a fully drained battery or a faulty display. Charge the phone and force a restart first, then use the checks below to find out whether the problem is software...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-Developers
Leave a Reply