If your Android phone is not charging, the cause is usually the charger, the cable or a dirty charging port. It can also be heat, a moisture warning, or a battery setting that stops charging at 80% on purpose. Work through the checks and fixes below in order. The last ones can erase data.

Quick Checks

  • Charger and cable: Google suggests charging another device with the same adapter and cable, checking that the cable is pushed in firmly at both ends and trying another cable or adapter.
  • Wall socket: Plug a lamp or another device into the same socket to confirm it has power.
  • Case: Remove the case. Google says it can block the plug or a wireless charger.
  • Temperature: A phone that is very hot or very cold may charge slowly or not at all until it returns to room temperature.

Common Causes at a Glance

What you see Likely cause Go to
No charging icon with any cable Faulty adapter, cable or socket, or a blocked port Fixes 1 and 2
Water drop icon or moisture alarm Moisture detected in the USB-C port Fix 3
Charging pauses when the phone is hot Heat protection Fix 4
Charging stops at 80% or 85% Battery protection or charging optimisation Fix 5
“Check charging accessory” notification Damaged or unsupported cable or adapter Fix 1
Very slow from a laptop Low USB power output PC section

Fixes, From Least to Most Invasive

1. Test the charger, cable and socket

  1. Use the charger that came with the phone, or one from the same brand. Samsung recommends Samsung-compatible chargers and cables, because similar-looking accessories can charge differently. Xiaomi says chargers from other brands may not match the phone’s power specification, and lower-rated chargers slow charging down.
  2. For Pixel phones, Google recommends a Google 30 W USB-C adapter or another PPS adapter rated 30 W or more, or other USB PD adapters rated 15 W or more.
  3. Swap the cable first, then the adapter. Samsung says to stop using any charger that shows damage.
  4. If you see “Check charging accessory”, Google says the cable or adapter may be damaged or not supported, which can make the phone charge very slowly or not at all.

2. Clean the charging port safely

Dust and lint can stop the plug from reaching the contacts. Samsung’s steps:

  1. Power off the phone.
  2. Shine a torch into the port and look for dust or dirt on the metal contacts.
  3. Gently blow into the port. Samsung UK also suggests a soft brush.
  4. If it is still clogged, have a professional clean it.

Samsung warns not to insert any object into the port, because it can damage it. Do not use liquids either.

3. Dry the port if you see a moisture warning

Samsung says Galaxy devices rated IP68 or higher, which covers most of the Galaxy series, have a moisture sensor. If it detects moisture in the USB port, an alert appears and cable charging stops to prevent corrosion.

  1. Unplug the charger.
  2. Wipe the phone with a dry cloth, or gently shake it 5 to 10 times with the port facing down. Do not shake it hard.
  3. Leave it on a cloth in a well-ventilated place, or dry it with a fan using cool air.
  4. Wait. Samsung estimates the water takes about 1 to 2 hours to evaporate.

Samsung notes that high humidity can trigger the warning even if the phone never touched water. Samsung also says wireless charging is not affected by port moisture, but dry the phone fully first. Never charge a wet phone or handle the charger with wet hands.

4. Let the phone return to room temperature

Samsung says charging may stop for a while or slow down when the phone is too hot. Games, video streaming and other heavy apps while charging raise the temperature. Xiaomi says overheating or a phone that is too cold can also block charging. Let it cool down or warm up gradually, then plug it in again.

5. Check settings that stop charging early

Samsung (One UI 6.1 or later): open Settings > Battery > Battery protection. Samsung lists three options:

  • Basic: charging stops at 100% and restarts when the battery drops to 95%.
  • Adaptive: uses Maximum while you sleep and switches to Basic before you wake up.
  • Maximum: charging stops at 80%.

Older models below One UI 6.1 offer only an 85% limit. While you are in Battery settings, open Charging settings and make sure Fast charging is on if your phone charges slowly.

Google Pixel: open Settings > Battery > Battery health > Charging optimization. Limit to 80% (Pixel 6a and later) keeps the battery at 80%. Adaptive Charging finishes charging just before you usually unplug. Separately, Pixel 3 and later on Android 11 or newer can limit charging to about 70–80% after more than a few hours of charging in high heat, or after several days on the charger. You will see “Protecting your battery”. Tap Charge to full under Battery, or restart the phone, to override it.

6. Run the built-in charging test

  • Samsung: open Samsung Members > Support, tap Get started under Phone diagnostics, then tap Battery status, Cable charging or Wireless charging.
  • Pixel 6 and later: open Settings > Battery & charging > Charging diagnostics. Google says it checks for high temperature, liquid or debris and incompatible chargers.

7. Restart, then test in Safe mode

Samsung lists third-party apps among the common reasons a phone fails to charge. First restart the phone from the power menu and plug it in again. If that does not help, restart in Safe mode, which turns off downloaded apps. On Samsung, open the power menu, touch and hold Power off until Safe mode appears, then tap it. If the phone charges normally in Safe mode, Google suggests removing recently downloaded apps one at a time and restarting after each one.

8. Update the software

Xiaomi says a system bug can stop a phone from charging and recommends updating to the latest version. On Samsung, go to Settings > Software update > Download and install. On Pixel and most other phones, look under Settings > System > Software update.

9. Factory reset or reflash (last resort, erases all data)

Warning: both steps delete everything on the phone. Back up first if the phone still turns on.

Xiaomi says some system versions can stop charging after an update or after flashing, and suggests a factory reset or clearing data in Recovery. If the problem began after you flashed a file yourself, reinstall the official firmware for your exact model with Odin on Samsung or Mi Flash Tool on Xiaomi. If the phone keeps restarting instead of booting, use our boot loop guide.

Charging From a PC or a Wireless Charger

Charging from a computer

Samsung’s advice for a Galaxy that will not charge from a PC:

  • Make sure the PC is on and not in sleep mode. Avoid USB hubs and adapters, which can reduce power.
  • Use a USB 3.0 port (often blue) or a dedicated charging port if your PC has one.
  • Restart both the phone and the PC.
  • Update the driver in Windows: open Device Manager, find the phone under Portable Devices, right-click it and choose Update driver.

Samsung also notes that fast charging may not work from a PC. If Windows does not see the phone at all, follow our Android USB driver guide for Windows 11.

Wireless charging

Remove the case and line up the back of the phone with the charging coil, as Samsung advises. Google adds that you should remove PopSockets and magnetic attachments, and notes that the coils in vertical car chargers often do not line up perfectly. Use an approved wireless charger for your model.

When It Is Hardware: Visit a Service Centre

  • Hot on the charger without use. Xiaomi says to unplug it and take the phone, the original adapter and the original cable to an authorised service centre.
  • Battery test says Bad or Reduced. Samsung’s Battery status result “Bad” means the battery has significantly degraded. On Pixel 8a and later, Google recommends a new battery when Battery health shows “Reduced”.
  • Swollen battery or lifting screen. Google says not to press the glass, pry the phone open or fix the battery yourself. Leave it unused on a table and arrange a repair.
  • Moisture alert keeps coming back after the port is dry. Samsung says to contact support or a service centre.
  • Damaged or corroded port. Samsung UK says this can cause slow charging or heat.
  • A battery left flat for a long time. Xiaomi says over-discharging can permanently damage the battery.

Related Guides

FAQ

My phone says moisture detected, but it is dry. What should I do?

Samsung says high humidity can trigger the warning. Unplug the phone, let it dry in a ventilated place for an hour or two and try again. If the alert keeps appearing, contact Samsung support or a service centre.

Can I use a charger from another brand?

It may charge slowly or not at all. Xiaomi says other brands may not match the phone’s power specification. For Pixel, Google lists USB PD adapters of 15 W or more.

Why does my phone charge so slowly from a laptop?

Samsung says fast charging may not work from a PC and that hubs reduce power. Use a USB 3.0 or charging port and keep the PC awake.

Will a factory reset fix a phone that won’t charge?

Only if the cause is software, for example after a bad update or flash. It erases all data, so try every other step first. If the charger, port and battery are faulty, a reset will not help.

https://droid-developers.com/wp-content/uploads/2026/11/android-phone-not-charging-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/android-phone-not-charging-featured-150x150.jpgFahim MahmudAndroidHelp & TroubleshootingSoftware FixIf your Android phone is not charging, the cause is usually the charger, the cable or a dirty charging port. It can also be heat, a moisture warning, or a battery setting that stops charging at 80% on purpose. Work through the checks and fixes below in order. The...Android Help,Troubleshooting  & Stock Rom