Android Auto Not Connecting? How to Fix Wired and Wireless
If Android Auto is not connecting, the cause is usually one of four things: a cable that cannot carry data, a phone that no longer meets Google’s requirements, an old pairing with the car, or Android Auto being switched off in the car. Work through the quick checks first, then try the fixes below in order. They start with the safest steps and end with a network reset.
Quick Checks Before You Start
These are the basic requirements from Google’s Get started with Android Auto page and its troubleshooting page. If one of them is missing, no setting on the phone will fix the connection.
| Check | What Google says |
|---|---|
| Android version | Android 11 or later, with an active data plan. Google recommends the latest Android version. |
| Type of phone | Android Auto is built into the phone. It is not available on phones running Android (Go edition). |
| Car or stereo | The car, or an aftermarket stereo, must support Android Auto. A USB port alone does not mean the car supports it. |
| USB cable | A high-quality cable, ideally under 1 metre (3 feet), with no USB hub or extension cable. |
| Wireless use | A phone with 5 GHz Wi-Fi support and an active data plan, plus a car or stereo that supports wireless Android Auto. |
Android 9 and 10 phones are losing support
In November 2026 Google changed its help page to list Android 11 as the minimum. Until then, wired Android Auto worked on Android 9 and 10, and Google’s main Android Auto page still mentions Android 9. 9to5Google reported that some drivers have seen a “Phone will no longer be supported” message since October 2026. Android Authority named the Galaxy S9, Galaxy Note 9 and Sony Xperia XZ2 Compact, which stopped at Android 10. Google has not given a cut-off date. If your phone cannot update past Android 10, plan to move to a newer phone.
Is Android Auto offered in your country?
Samsung’s guide tells users to check that Android Auto is available in their country. Google’s Android Auto page lists the supported countries. India is on the list. Bangladesh, Pakistan, Sri Lanka and Nepal are not listed at the time of writing, so Google does not officially offer Android Auto there, even if the car has it.
Step-by-Step Fixes (Safest First)
1. Make sure Android Auto is on in the car
Google says to check that Android Auto is turned on in the car’s infotainment settings, then restart the infotainment system. Some cars only gained Android Auto through a software update, so ask your dealer if your model should support it. For aftermarket stereos such as Pioneer and Kenwood, check the maker’s website for firmware updates.
2. Unplug, restart the phone and try again
- Unplug the USB cable from the phone.
- Restart the phone. On a Samsung Galaxy, open the Quick panel, tap the Power icon, then tap Restart.
- Park the car and switch on the infotainment system.
- Plug the cable in again and follow the prompts on the phone and on the car screen.
3. Replace the USB cable
Google says not all cables work with all cars. If Android Auto worked before and then stopped, Google says replacing the cable will likely fix it. Use the cable that came with your phone or a cable certified by the USB Implementers Forum (USB-IF). Keep it under 1 metre and plug it straight into the car’s port. Samsung adds that the cable must support data transfer, because some cheap cables can only charge.
Also look inside the phone’s USB port. Samsung notes that dust or lint in the port can block data transfer. After plugging in, Samsung also suggests swiping down, tapping the Android system USB notification and choosing the file transfer option.
4. Update the phone, Android Auto and Google Play services
Android Auto is part of the phone, but its updates arrive through Google Play.
- Open the Play Store, tap your profile icon and tap Manage apps & devices.
- Under Updates available, update Android Auto and your other apps.
- Install any system update. On a Pixel, go to Settings > System > Software update. On a Galaxy, go to Settings > Software update > Download and install.
Updates do fix connection bugs. Android Authority reported that Google Play services v26.22, released in June 2026, listed “Bug fixes for Device Connections related services” after months of Android Auto complaints, mostly from Pixel and Galaxy owners on wired connections. For other brands, see our guide on how to check for Android system updates.
5. Check the car’s Bluetooth settings on the phone
On a Galaxy phone, Samsung’s steps are:
- Go to Settings > Connections > Bluetooth.
- Tap the gear icon next to your car.
- Make sure Calls and Audio are switched on. Turn on Contact or Message access if you see those options.
- If a switch will not turn on, tap Unpair, confirm, and pair the car again from Available devices.
On a Pixel, go to Settings > Connected devices > Bluetooth > Saved devices, tap the gear icon next to the car, and turn on Phone audio and Media audio.
6. Clear the Android Auto cache
- Samsung Galaxy: Settings > Apps > Android Auto > Storage > Clear cache.
- Pixel: Settings > Apps > See all apps > Android Auto > Storage & cache > Clear cache.
Clearing the cache only removes temporary files. Clear storage is a bigger step: Google warns that it erases all data saved in the app, so you would need to set Android Auto up again.
7. Forget the car and set it up again
Google recommends this when you connect the phone to a second car, and it also gives the phone a clean start with your current car. Google’s steps:
- Unplug the phone from the car.
- Go to Settings > Connected devices > Connection preferences > Android Auto > Previously connected cars. If your phone uses different menus, search Settings for “Android Auto”.
- Tap the menu icon in the top right, then tap Forget all cars.
- Remove the phone from the car’s list of paired phones (your car manual shows how), and forget the car in the phone’s Bluetooth settings.
- Plug the phone into the car again and complete the setup.
8. Reset Wi-Fi and Bluetooth settings
Warning: this removes every saved Wi-Fi network and every paired Bluetooth device, not only the car. Your apps, photos and files are not deleted.
- Pixel: Settings > System > Reset options > Reset Bluetooth & Wi-Fi > Reset settings.
- Samsung Galaxy: Settings > General management > Reset > Reset Wi-Fi and Bluetooth settings > Reset settings. Samsung notes there is no second confirmation, so the reset starts straight away.
Wireless Android Auto Not Connecting
- Keep Bluetooth, Wi-Fi and Location on. Google says to keep all three on during setup for best results.
- Check for 5 GHz Wi-Fi. On a Galaxy, go to Settings > Connections > Mobile Hotspot and Tethering > Mobile Hotspot > Configure > Band. If 5 GHz is an option, the phone supports it.
- Check your car. Google says wireless only works between certain phones and certain cars. Ask the car maker, or JVC, Kenwood or Pioneer for an aftermarket stereo, whether wireless is supported.
- Use the car’s pairing menu. Google’s setup guide says to press and hold the voice command button on the steering wheel to open pairing. If that does not work, follow the car maker’s instructions.
- Try one wired connection. Samsung’s guide says wireless use needs a first USB connection. Google’s current guide also allows Bluetooth pairing, but if wireless setup keeps failing, connect once with a cable.
When the Problem Is the Car or the Hardware
Try a second certified cable, then another phone in the same car. If another phone works, the fault is your phone: visit a service centre if its USB port is loose or it will not charge or connect to a computer with any cable. If no phone works, the fault is the car or stereo. Samsung advises contacting the car maker’s service centre, because a software or firmware update often fixes it.
Related Guides
- How To Check For Android System Updates
- Android 17: Release Date, Features and Supported Phones
- One UI 9 Release Date and Eligible Galaxy Devices (Full List)
- HyperOS 3 Update List: Eligible Xiaomi, Redmi and POCO Phones
FAQ
Do I need to download Android Auto from the Play Store?
No. Google says Android Auto is built into supported phones, so you do not install it separately. You may still need to update it from the Play Store before your first connection.
Can I still use Android Auto on an Android 10 phone?
Google’s help page now lists Android 11 or later as required, and some Android 10 owners have already seen a “Phone will no longer be supported” message. Google has not given a final date, so an Android 10 phone may keep working for a while, but it is no longer supported.
Does every car with Android Auto support wireless?
No. Google says wireless Android Auto only works with certain phones and certain cars. Check with the car or stereo maker. If wireless is not supported, use a USB cable.
Will a factory reset fix Android Auto?
A factory reset erases everything on the phone, and it is not one of the fixes on Google’s Android Auto troubleshooting page. Try the steps above first. If Android Auto still fails with several cables while another phone works in the same car, have your phone checked at a service centre.
https://droid-developers.com/android-auto-not-connecting/https://droid-developers.com/wp-content/uploads/2026/11/android-auto-not-connecting-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/android-auto-not-connecting-featured-150x150.jpgAndroidHelp & TroubleshootingSoftware FixIf Android Auto is not connecting, the cause is usually one of four things: a cable that cannot carry data, a phone that no longer meets Google's requirements, an old pairing with the car, or Android Auto being switched off in the car. Work through the quick checks first,...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-Developers
Leave a Reply