A phone overheating after an update is usually a short-term problem: after a system update, Android re-optimises your apps and syncs data in the background, which keeps the processor busy and warms the phone for a day or two. If the heat lasts longer than a few days, the cause is usually an app that misbehaves with the new software, a charging problem or, less often, the battery. Start with the quick checks below, then work through the fixes in order.

Why a Phone Gets Hot After an Update

  • App compilation. Xiaomi explains that after a system upgrade, the phone compiles the newly updated code. This uses system resources and causes short-term heat and battery use, and Xiaomi says the process lasts one to two days.
  • Background optimisation on the charger. On Android 14 and later, the system does only a quick check of apps on the first start after an update. The fuller optimisation runs later as a background job. By default, that job runs once a day when the phone is idle and charging, and it stops if the phone gets too warm.
  • The update itself. Xiaomi notes that heat while an update downloads and installs is normal, because network use and processor load go up.
  • Syncing and restoring. Google lists initial setup and restoring from a backup as common causes of heat, and Samsung lists heavy cloud, email and account syncing.
  • An app stuck in a loop. In July 2026, 9to5Google reported that Galaxy S25 and S24 owners saw battery drain and overheating after the One UI 8.5 July update. One S25 Ultra owner traced it to WhatsApp, which seemed stuck in its backup process after the update. It is not confirmed that this was the cause for everyone, and Samsung had not acknowledged the problem at the time.

What is normal and what is not

What you notice Normal? What to do
Warm while the update downloads and installs Yes Let it finish away from direct sun
Warm for one to two days after the update Usually Charge it overnight on Wi-Fi and wait
Hot while idle and not charging, several days later No Check battery usage and test safe mode
Heat warning, apps close or charging stops A safety reaction Unplug, let it cool, then troubleshoot
Swelling, or the back cover lifting No Stop using it and visit a service centre

Quick Checks

  • Cool it down first. Unplug the charger, take off the case, move the phone out of direct sunlight and stop games, video calls, camera recording and navigation until it cools.
  • Check the temperature reading on a Pixel. On Pixel 6a and later, open Settings > Battery > Battery diagnostics > Phone is very warm. It shows an estimated temperature and one of four states: Cold, Normal, Warm or Elevated.
  • Know what the warnings mean. When a Galaxy phone gets too hot, Samsung says it limits brightness and performance, stops charging, closes running apps and restricts calls except emergency calls until it cools. Pixel phones may reduce processor speed and charging speed, turn off the camera or flash, limit mobile data, Wi-Fi or 5G and enter low power mode. If the temperature keeps rising, both turn off.
  • Look at the charger and cable. Samsung says a damaged cable or a dirty or damaged charging port can cause heat. Xiaomi recommends the official charger and cable.

Fixes, From Least to Most Invasive

1. Give it a day or two, and charge it overnight

Because the heavier optimisation job runs when the phone is idle and charging, leave the phone on the charger overnight on Wi-Fi for the first night or two. Do not use it heavily while it charges. Google warns that charging during demanding tasks, such as restoring backups, adds heat.

2. Restart the phone

Samsung says conflicts between running apps can cause heating and recommends a restart. After an update, Samsung also suggests waiting a few minutes after the restart for apps to optimise.

3. Install pending system and app updates

Makers often fix early bugs in a follow-up update, and app developers update their apps for new Android versions.

  • Samsung: Settings > Software update > Download and install.
  • Pixel and most other phones: Settings > System > Software update.
  • Apps: Open the Play Store, tap your profile icon, then Manage apps & devices and update the apps listed under “Updates available”.

Our guide on checking for Android system updates has more detail.

4. Find the app that is working too hard

Open the battery screen and look for an app with unusually high use, especially in the background:

  • Samsung: Settings > Battery, then tap the battery graph to see usage per app.
  • Pixel: Settings > Battery > Battery usage, then tap View by apps.
  • Xiaomi, Redmi and POCO: Settings > Battery.

If one app stands out, open it and let any backup or sync finish, update it, or clear its cache in the app’s settings under Storage (Samsung) or Storage & cache (Pixel). You can also force stop it from App info. Google warns not to force stop essential system apps or services, because the phone may stop working correctly.

5. Test in safe mode

Safe mode runs the phone without downloaded apps. If the phone stays cool in safe mode, an app is the cause.

  • Samsung: Open the power-off screen (press and hold the Power key, or use the key combination you normally use to switch off). Touch and hold Power off until Safe mode appears, and tap it.
  • Pixel 6 and later: Hold Power + Volume Up, then touch and hold Power off or Restart and tap OK.

Uninstall the most recently installed apps one at a time, then restart normally to leave safe mode.

6. Cut down extra heat sources

  • Lower the screen brightness. On Samsung, also set the refresh rate to Standard, because higher refresh rates use more power.
  • Use Wi-Fi instead of mobile data where possible. Weak signal makes the phone work harder.
  • Turn off the hotspot, Bluetooth and GPS when you do not need them.
  • When charging wirelessly, keep metal objects and cards away from the charging pad.

7. Wipe the cache partition (only if your phone has it)

Samsung lists this as a fix for problems after a software update. It removes temporary system files without deleting personal data. Many newer phones no longer show the option in recovery mode, so skip this step if you cannot find it.

8. Factory reset (erases all data)

Warning: A factory reset deletes all apps, photos and files on the phone. Back up first. On Samsung, the path is Settings > General management > Reset > Factory data reset. Google notes that battery optimisation can take a few weeks to take full effect after a factory reset, and it lists restoring from a backup as a common cause of heat, so expect some warmth at first.

When It Is Hardware: Visit a Service Centre

  • The phone is hot while idle and not charging, even after the steps above. Xiaomi advises taking such a phone to after-sales service for inspection.
  • The phone keeps turning off because of heat. Google tells Pixel owners to contact Pixel support in this case.
  • You see swelling, the back cover bulging or separating, or much faster battery drain. Google lists these as battery swelling symptoms and advises you to stop using the phone.
  • On some Pixel 6a units, Google’s mandatory Android 16 update added battery management features to reduce the risk of battery overheating. After 400 charge cycles they reduce battery capacity and charging performance, and they stay active until the battery is replaced. Google’s free battery replacement programme for those phones ended on 8 July 2026.

On Galaxy phones, you can also send an error report through the Samsung Members app.

Related Guides

FAQ

How long does a phone stay warm after an update?

Xiaomi says the compilation after a system update lasts one to two days. Google says some extra battery use after an update is normal and asks Pixel owners to contact support if unusual drain continues after a few days. Heat that lasts longer than that is worth troubleshooting.

Why does my phone get hot on the charger after the update?

Charging always creates some heat, and fast charging creates more. After an update, the background optimisation also runs while the phone is idle and charging. Both are normal. The job stops by itself if the phone gets too warm.

Is it safe to keep using a hot phone?

The phone protects itself by slowing down, stopping charging and, if needed, turning off. Still, Samsung and Google both advise you to stop using it and let it cool when it feels too hot. If the problem keeps coming back, contact the maker’s support.

Will a factory reset stop the overheating?

It can, if an app or corrupted data is the cause. It will not fix a hardware fault, and it erases your data. Try the earlier steps first, especially the safe mode test.

https://droid-developers.com/wp-content/uploads/2026/11/phone-overheating-after-update-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/phone-overheating-after-update-featured-150x150.jpgFahim MahmudAndroidHelp & TroubleshootingSoftware FixA phone overheating after an update is usually a short-term problem: after a system update, Android re-optimises your apps and syncs data in the background, which keeps the processor busy and warms the phone for a day or two. If the heat lasts longer than a few days, the...Android Help,Troubleshooting  & Stock Rom