Redmi Stuck in Fastboot Mode: How to Fix It
A Redmi stuck in fastboot mode shows the word FASTBOOT on the screen and will not start Android. The first thing to try is Xiaomi’s force restart: hold the Power button for more than 10 seconds. If your Redmi keeps going back to fastboot, the cause is usually a stuck Volume Down button or damaged software, and the fixes below go from safe steps to ones that erase the phone.
What Fastboot Mode Is on a Redmi
Fastboot mode is the bootloader screen that a PC uses to flash software over USB. Xiaomi’s own guide opens it on purpose: turn the phone off, then hold Volume Down + Power. Entering fastboot does not delete anything by itself. For the commands that work in this mode, see our fastboot commands list.
Why a Redmi gets stuck in fastboot
- Volume Down is pressed during start-up. Because Volume Down + Power opens fastboot, a stuck button or a tight case can send the phone there each time it starts.
- The software cannot start. XDA forum users report Xiaomi phones, including a Redmi Note 11, that ended up in a fastboot loop after a failed or interrupted update, even on locked phones with stock software.
- A flash went wrong. On an unlocked phone, a wrong or incomplete boot image or ROM can leave fastboot as the only screen that works.
Quick Checks First
- Remove the case and press Volume Down a few times. It should click and spring back.
- Note what happened just before: an update, a flash, a drop or contact with water. It helps you pick the right fix.
- If the battery may be empty, charge for 15 to 30 minutes with the original charger, as Xiaomi suggests, then try again.
- If the phone gets hot on the charger and does not react, stop. Xiaomi says to take the phone, charger and cable to an authorized service centre.
How to Fix a Redmi Stuck in Fastboot Mode
Try these in order. The first three do not touch your data.
Fix 1: Force restart with the Power button
- Unplug any USB cable. Hold Power alone for more than 10 seconds until the screen goes off and the phone restarts. Xiaomi lists this as its force-restart method.
- Do not touch the volume buttons while it starts.
- If it starts normally, the problem was most likely a button press. Check the Volume Down key and the case.
Fix 2: Restart from a computer
If the button method does not work, a PC can send the restart command.
- Download Google’s SDK Platform-Tools and extract it.
- Install a USB driver on Windows. Google says its own driver is for Google devices and other brands supply their own, so use a Xiaomi driver, such as the one that comes with Mi Flash or Mi Unlock. Our Windows 11 USB driver guide covers the setup.
- Connect the Redmi, open a command window in the platform-tools folder and run
fastboot devices. It lists connected phones and changes nothing. - Run
fastboot rebootto restart the phone normally. - If it comes back to fastboot, try
fastboot continue, which asks the bootloader to continue booting as normal, if it can.
fastboot devices
fastboot reboot
fastboot continue
If the window only shows < waiting for any device >, the PC cannot see the phone. Reinstall the driver and try another cable or USB port.
Fix 3: Open recovery mode and restart
- Turn the phone off. If it will not stay off, hold Power until it restarts and release it.
- With the phone off, hold Volume Up + Power. Xiaomi says this opens Recovery mode.
- In Recovery mode, hold Power for more than 10 seconds to restart, as Xiaomi’s guide describes.
From a PC you can also try fastboot reboot recovery. If it does not work on your model, use the buttons.
Fix 4: Wipe data from recovery (erases the phone)
Warning: This deletes all apps, photos and files. Xiaomi says data cannot be recovered afterwards unless you backed it up. Only use this if the phone still will not start.
- Open Recovery mode with Volume Up + Power.
- Use Volume Down to select Wipe Data and press Power.
- Select Wipe All Data and press Power to confirm.
- Go back and choose the reboot option.
After the wipe, Xiaomi asks for the password of the Xiaomi account that was signed in on the phone. Have it ready before you start.
Fix 5: Flash the official fastboot ROM (unlocked bootloader only)
If the bootloader is already unlocked, flashing the official fastboot ROM replaces all the software and usually ends the loop. In short:
- Run
fastboot getvar productto read the phone’s product name. It changes nothing. - Download the official fastboot ROM for that exact model and region from Xiaomi, and Mi Flash.
- In Mi Flash, choose clean all and click flash. This erases the phone.
Our Mi Flash Tool guide has the full steps. Do not choose clean all and lock unless you are sure the ROM is the official one for your phone and region.
If the bootloader is locked
A locked Redmi refuses fastboot flashing with a message such as “Erase is not allowed in Lock State”. You also cannot apply for an unlock now, because the binding step needs a phone that starts. Xiaomi’s Local Update method needs a working phone too. If Fixes 1 to 4 did not work, take the phone to an authorized Xiaomi service centre. XDA reports that the deeper repair method, EDL mode, needs an authorized Mi account, which normal users do not have.
When It Is Hardware: Visit a Service Centre
- The Volume Down button is stuck, loose or does not click, even without a case.
- The phone was dropped or got wet before the problem started.
- It gets hot on the charger and does not react.
- It stays on the Mi logo for a long time with no Android text at the bottom. Xiaomi says to have this checked at an after-sales centre.
- It returns to fastboot even after a full official flash finishes without errors.
Xiaomi also notes that some older REDMI models have no Recovery mode and cannot be flashed in fastboot mode. Those phones need a service centre.
Related Guides
- Fastboot Commands List Explained (With Examples)
- Mi Flash Tool Latest Version: How to Flash a Xiaomi Fastboot ROM
- Phone Stuck in a Boot Loop? Universal Fixes for Android Phones
- Android USB Driver for Windows 11 (All Major Brands)
FAQ
Does fastboot mode delete my data?
No. Entering fastboot, holding Power to restart, and the fastboot reboot command do not erase anything. Wiping data in recovery and flashing a ROM with clean all do erase the phone.
How do I exit fastboot on a Redmi without a computer?
Hold the Power button alone for more than 10 seconds. The phone should restart into Android. If it returns to fastboot, check the Volume Down button and try Recovery mode with Volume Up + Power.
Why does my Redmi go to fastboot by itself?
Usually because Volume Down is being pressed while the phone starts, or because the software is damaged after a failed update or flash. If the button is fine and a restart does not help, it is a software problem.
My PC does not detect the Redmi in fastboot. What should I do?
Install a Xiaomi USB driver, use a data cable rather than a charge-only cable, and try a different USB port. Then run fastboot devices. If the phone appears, the connection works.
Can I flash a Redmi in fastboot with a locked bootloader?
No. A locked bootloader refuses flashing commands. Unlocking needs a phone that starts, so a locked Redmi that is stuck in fastboot needs a service centre.
https://droid-developers.com/redmi-stuck-in-fastboot-mode/https://droid-developers.com/wp-content/uploads/2026/11/redmi-stuck-in-fastboot-mode-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/redmi-stuck-in-fastboot-mode-featured-150x150.jpgHelp & TroubleshootingSoftware FixXiaomiA Redmi stuck in fastboot mode shows the word FASTBOOT on the screen and will not start Android. The first thing to try is Xiaomi's force restart: hold the Power button for more than 10 seconds. If your Redmi keeps going back to fastboot, the cause is usually a...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-Developers
Leave a Reply