Fastboot mode is a special start-up screen where the phone’s bootloader waits for commands from a computer over USB, before Android loads. It is used to flash official software and unlock the bootloader, but many people land there by accident after pressing the wrong buttons. To exit, choose the normal start option with the volume and power buttons, hold Power to force a restart, or run fastboot reboot from a computer.

What Is Fastboot Mode?

Fastboot is both a mode of the phone’s bootloader and the name of Google’s computer tool that talks to it. The tool comes in the free SDK Platform-Tools package. Android is not running in this mode, so the touch screen does not work. You move through the menu with the volume buttons and select with the Power button.

Phones use fastboot mode to:

  • Flash official images, for example a Xiaomi fastboot ROM or a Pixel factory image.
  • Unlock or relock the bootloader, on phones whose maker allows it. Unlocking erases all data.
  • Restart into recovery mode or back into Android.

Opening or leaving fastboot mode does not change your data. Only flash, erase and unlock commands sent from a computer do that. The full list of commands is in our fastboot commands guide.

Fastboot, fastbootd, recovery and Download mode

Mode What it is Used for
Fastboot (bootloader) The bootloader waits for fastboot commands over USB. Flashing low-level images such as the bootloader, radio and boot; unlocking.
fastbootd Fastboot running inside the recovery image, added in Android 10. Flashing dynamic partitions such as system and vendor.
Recovery mode A small separate system on the phone. Factory reset, installing an update from ADB, restarting.
Download mode Samsung’s own flashing mode. Flashing Samsung firmware with Odin. Galaxy phones do not use fastboot.

If you are not sure which fastboot mode you are in, run fastboot getvar is-userspace. It answers yes in fastbootd and no in the bootloader.

Why Your Phone Is in Fastboot Mode

  • The button combination. On Google Pixel and Xiaomi, Redmi and POCO phones, holding Volume Down and Power while the phone starts opens fastboot mode. A tight case or a stuck Volume Down button can do this every time you restart.
  • A computer command. adb reboot bootloader or a flashing tool sends the phone there on purpose.
  • Android cannot start. On Pixel phones, the fastboot screen shows an “Enter reason” line. “Boot failure” there means the phone reached the bootloader but could not start Android.

How to Enter Fastboot Mode

With a computer

  1. Turn on USB debugging in Developer options.
  2. Connect the phone to the computer with a USB data cable.
  3. In the platform-tools folder, run:
    adb reboot bootloader
  4. Check the connection:
    fastboot devices

    You should see a serial number followed by fastboot.

On Windows you need a USB driver for the phone. See our Windows 11 USB driver guide.

With the buttons

Phone How to open fastboot mode
Google Pixel 6 and later Turn the phone off. Hold Volume Down + Power together for up to 30 seconds until the Fastboot mode screen appears. If you hold them too long, the phone restarts.
Xiaomi, Redmi, POCO Turn the phone off. Hold Volume Down + Power. (Volume Up + Power opens Recovery mode instead.)
Samsung Galaxy No fastboot mode. Galaxy phones use Download mode and Odin. See our Odin flashing guide.
Other brands Keys differ by model. Check your maker’s support page, because the same keys can open recovery on another phone.

From recovery mode

Stock Android recovery has a Reboot to bootloader option and an Enter fastboot option (for fastbootd). Recovery menus made by phone makers can use different names.

How to Exit Fastboot Mode

Try these in order. None of them erases your data.

1. Choose the normal start option

  1. Press Volume Up or Volume Down to move through the options.
  2. Stop on the option that starts Android. On Pixel phones it is called Start.
  3. Press Power once to select it.

On a Pixel, Restart bootloader only reloads the fastboot screen. It does not repair anything.

2. Force a restart with the Power button

Hold only the Power button until the screen goes dark and the phone restarts. Xiaomi says to hold it for more than 10 seconds. For a Pixel that will not respond, Google says to hold Power for about 35 seconds. Do not hold Volume Down at the same time, or the phone opens fastboot mode again.

3. Send a reboot command from a computer

If the phone is connected and appears in fastboot devices, run:

fastboot reboot

This restarts Android normally. To open recovery instead, run fastboot reboot recovery. In Windows PowerShell, type .\fastboot instead of fastboot.

If the Phone Keeps Going Back to Fastboot Mode

If Start, a forced restart and fastboot reboot all bring you back to the same screen, Android itself is probably not starting. Work through these steps from the safest to the most drastic.

1. Check the Volume Down button

Remove the case and press Volume Down a few times. If it feels stuck or does not click, the phone may think you are holding it. That is a hardware repair.

2. Restart from recovery mode

Open recovery mode from the fastboot menu or with the keys for your phone, then choose Reboot system now. If your phone’s recovery has Wipe cache partition, try that first. It does not delete your personal data.

3. Repair the software with the official tool

  • Pixel 4a and later: Google’s Update and Software Repair tool at pixelrepair.withgoogle.com can reinstall the software from a computer, often without a factory reset. A full OTA image sideloaded from recovery also repairs the software without wiping the phone.
  • Xiaomi, Redmi, POCO: you can flash the official fastboot ROM with Mi Flash, but only on an unlocked bootloader, and the flash erases all data. See our Mi Flash Tool guide.

4. Factory reset from recovery (erases all data)

Warning: a factory reset erases everything on the phone that is not backed up. After the reset, the phone asks for the Google Account that was on it before, so make sure you know that account’s password first. In recovery, choose Wipe data/factory reset and confirm.

5. Reflash the official firmware

If even a reset does not help, reinstall the official firmware for your exact model. The steps for each brand are in our boot loop fix guide. Never use firmware made for another model.

When to visit a service centre

Take the phone to an authorised service centre if a button is physically stuck, if the phone returns to fastboot mode even after a clean firmware flash, or if it gets hot without responding. Xiaomi advises taking the phone, original charger and cable to after-sales if it is hot on the charger and does not react.

Related Guides

FAQ

Does fastboot mode mean my phone is bricked?

No. A phone that shows the fastboot screen still has a working bootloader. In most cases it was opened by the buttons or a computer, and one of the exit methods above starts Android again.

Will exiting fastboot mode erase my data?

No. Choosing Start, forcing a restart or running fastboot reboot does not touch your data. Data is only erased by a factory reset, by unlocking the bootloader or by flashing commands such as fastboot -w.

Why does fastboot devices show nothing?

Check that the phone is really in fastboot mode, then try another cable and USB port. On Windows, install the Google USB Driver for Pixel phones or your maker’s driver for other brands. macOS and Linux do not need a driver.

Do Samsung phones have fastboot mode?

No. Samsung uses its own Download mode, and firmware is flashed with Odin instead of fastboot. ADB still works on Galaxy phones.

What is the difference between fastboot and fastbootd?

Fastboot runs in the bootloader. Fastbootd, added in Android 10, runs inside recovery and flashes the dynamic partitions, such as system, that the bootloader refuses. Use fastboot reboot fastboot to enter it and fastboot reboot bootloader to go back.

https://droid-developers.com/wp-content/uploads/2026/11/fastboot-mode-how-to-exit-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/fastboot-mode-how-to-exit-featured-150x150.jpgFahim MahmudAndroidFlash ToolsHelp & TroubleshootingFastboot mode is a special start-up screen where the phone's bootloader waits for commands from a computer over USB, before Android loads. It is used to flash official software and unlock the bootloader, but many people land there by accident after pressing the wrong buttons. To exit, choose the...Android Help,Troubleshooting  & Stock Rom