Samsung OEM Unlocking Missing on One UI 8 and 9: What Changed
If OEM unlocking is missing on your Samsung phone, the most likely reason is One UI 8. Starting with that version, Samsung removed the OEM unlocking switch from Developer options on Galaxy phones in every region, not only in the United States. Samsung has never explained the change, and there is no official way to get the switch back on One UI 8, 8.5 or 9.
What OEM Unlocking Does
OEM unlocking is an Android setting in Developer options. According to Android’s bootloader documentation, turning it on tells the bootloader that it may be unlocked. Without it, the device should refuse an unlock request. Unlocking then performs a factory reset, so all data on the phone is erased.
On Galaxy phones, an unlocked bootloader was needed for:
- Custom ROMs and custom kernels
- Custom recovery such as TWRP
- Full root access, for example with Magisk
You do not need OEM unlocking to update your phone, to install official Samsung firmware with Smart Switch, or to reflash official firmware with Odin. Our Odin flashing guide works on a locked bootloader.
Unlocking also had a permanent cost. Samsung’s Knox documentation describes the Knox warranty bit as a one-time e-fuse that changes from 0 to 1 when unofficial software is installed. Once tripped, it cannot be reverted, and Knox-based features such as Secure Folder and Samsung Wallet stop working.
What Changed: Key Facts and Dates
| Date | What happened |
|---|---|
| Before One UI 8 | Galaxy phones sold outside North America had the OEM unlocking switch. US and Canadian models already could not be unlocked. |
| 26 to 28 July 2025 | 9to5Google, Android Authority, SamMobile and Android Police report that the switch is gone on the Galaxy Z Fold7 and Z Flip7, which shipped with One UI 8, and on One UI 8 beta builds for the Galaxy S25 series. |
| 27 July 2025 | Android Authority, citing an XDA analysis, reports a new bootloader setting, androidboot.other.locked=1, that hides the OEM unlocking option in Settings. |
| August 2025 | SamMobile suggests the change is linked to EU cybersecurity rules for radio equipment, which applied from 1 August 2025. Samsung has not confirmed this. |
| October 2025 | Exception: the Galaxy XR headset launches with a working OEM unlock switch, according to Android Authority. |
| 25 February 2026 | The Galaxy S26 series is announced with Android 16 and One UI 8.5. It has no OEM unlocking switch. |
| 16 September 2026 | One UI 9 (Android 17) rollout begins. Claims on forums that OEM unlocking has returned have not been confirmed. |
Samsung has not published a statement on why it removed bootloader unlocking or whether it will ever return. A Samsung Community thread on the topic, active from September 2025 to April 2026, received no answer from Samsung staff.
How Deep Is the Change?
This is not just a hidden menu item. The XDA developer who first analysed One UI 8 found that the code that controls bootloader unlocking appears to have been removed from the bootloader itself. If that is correct, no setting change, reset or simple workaround can bring the switch back.
Which Galaxy Phones Are Affected?
No OEM Unlocking
- Any Galaxy phone or tablet updated to One UI 8 or later. Reports say the switch disappears regardless of region once the update is installed.
- Phones that launched with One UI 8 or later, including the Galaxy Z Fold7 and Z Flip7 (One UI 8) and the Galaxy S26, S26+ and S26 Ultra (One UI 8.5).
- US and Canadian models, on any software version.
May Still Have OEM Unlocking
- Galaxy models sold outside North America that are still on One UI 7 or older.
Other Reasons the Switch Is Missing on Older Software
If your phone is still on One UI 7 or older and you cannot see the switch, check these points:
- Developer options is off. Go to Settings > About phone > Software information and tap Build number seven times. Developer options then appears at the bottom of Settings.
- The phone is financed or company-managed. Samsung’s Knox Guard service, used by some sellers and lenders, can hide Developer options completely. Only the seller or administrator can lift this.
- The phone was just set up. Owners have long reported that on some models the switch only appears after the phone has been connected to the internet for several days after setup. Samsung has never documented this.
What Galaxy Owners Should Do Now
If You Only Want to Update or Repair Your Phone
Nothing changes for you. Use Settings > Software update, Smart Switch on a PC, or official firmware with Odin. Check our One UI 9 eligible devices list to see whether your model gets the latest update. Reports say that on the Galaxy S26 series and Galaxy Z Fold7 with One UI 8.5, Download mode now needs Maintenance mode turned on first; the Odin guide explains how.
If Your Phone Still Has OEM Unlocking
- Decide before you update. Installing One UI 8 or later removes the switch.
- Do not expect to go back. Each Samsung firmware has a bootloader revision, and Odin refuses firmware with a lower revision than the one on your phone (the “SW REV CHECK FAIL” error). If the One UI 8 update raised the bootloader revision, you cannot flash One UI 7 again.
- Know the cost of unlocking. It wipes the phone and permanently trips Knox.
Avoid Paid “Unlock Services” and Exploits
There is no official method to unlock a Galaxy bootloader on One UI 8 or later. Tools that claim to do it, or that give temporary root, depend on security holes in the software. Security updates are meant to close those holes, and running such tools can leave your phone, and your data, less safe. Do not pay for remote unlock services or flash modified firmware from unknown uploads.
If You Need an Unlockable Phone
Buy a model from a brand that still documents bootloader unlocking. For example, Google’s Pixel factory images page warns that an unlocked bootloader makes the phone less secure and tells you to relock it when you finish flashing. Our fastboot commands list explains the commands, including how to check whether unlocking is allowed with fastboot flashing get_unlock_ability.
Related Guides
- How to Flash Samsung Firmware with Odin (2026 Guide)
- One UI 9 Release Date and Eligible Galaxy Devices (Full List)
- Fastboot Commands List Explained (With Examples)
- All In One Samsung USB Driver For Mobile Phone
FAQ
Can I get OEM unlocking back on One UI 8 or One UI 9?
Not officially. Samsung removed the option starting with One UI 8, and analysis of the firmware suggests the unlocking code itself was removed from the bootloader. No setting, reset or region change restores it.
Will Samsung bring bootloader unlocking back?
Samsung has not said. It has not explained the removal, and forum claims that the switch returned in One UI 8.5 or One UI 9 have not been confirmed.
Does the Galaxy S26 have OEM unlocking?
No. The Galaxy S26, S26+ and S26 Ultra launched with One UI 8.5, which does not include the OEM unlocking switch, and One UI 9 has not added it back.
Can I still flash official firmware without OEM unlocking?
Yes. Odin and Smart Switch install Samsung-signed firmware on a locked bootloader. You only need OEM unlocking for unofficial software such as custom ROMs or a custom recovery.
My phone is on One UI 7 and still shows OEM unlocking. Should I update?
For security, updates are important, and Samsung keeps sending them. If you plan to unlock the bootloader, do it before updating, but remember that unlocking wipes the phone and permanently trips Knox. After One UI 8 is installed, the switch will be gone.
https://droid-developers.com/samsung-oem-unlocking-missing/https://droid-developers.com/wp-content/uploads/2026/11/samsung-oem-unlocking-missing-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/samsung-oem-unlocking-missing-featured-150x150.jpgAndroid OSHelp & TroubleshootingRootIf OEM unlocking is missing on your Samsung phone, the most likely reason is One UI 8. Starting with that version, Samsung removed the OEM unlocking switch from Developer options on Galaxy phones in every region, not only in the United States. Samsung has never explained the change, and...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-Developers
Leave a Reply