If your Samsung is stuck on the logo, the phone turns on but never gets past the Samsung or Galaxy logo, or it keeps restarting at that screen. Most cases are software problems you can fix without losing data: charge the phone, force a restart, pick Normal Boot, try Safe mode and then repair the software with Smart Switch. A factory reset or an Odin reflash erases the phone, so leave those for last.

Why Galaxy Phones Get Stuck on the Logo

The usual causes are an update that failed or was interrupted, an app that crashes the system, and modified or wrong firmware after root or a bad flash. Hardware can cause the same symptom: a weak battery, liquid damage or a failing main board. For phones of other brands, see our universal boot loop guide.

Known Samsung Issues in 2026

  • One UI 9 setup error (October 2026): Some Galaxy S24, S25 and S26 owners reported that after the One UI 9 update the phone stopped at an XML “Access Denied” error during setup and would not reach the home screen. Samsung had not confirmed a cause or an official fix in those reports, and we could not confirm a fix by mid-November 2026.
  • Galaxy S22 boot loops (February 2026): Owners reported boot loops and freezes after the February 2026 security patch. Samsung had not given a public response at the time.

Quick Checks

  • Charge it. Samsung says a phone below 5% battery may not turn on after a restart. If the battery is empty, charge it for at least 15 minutes with the supplied cable and a Samsung charger.
  • Look for damage. Check the charging port for corrosion or bent pins. Remove the SIM tray and look at the liquid damage indicator: solid pink, purple or red means the phone has been wet.
  • Re-seat the SIM card. Make sure the card sits flat in the tray and the tray closes flush. In 2025, some Galaxy A56 owners whose phones stuck at the boot screen after an update got past it by starting the phone with the SIM removed, then putting it back.
  • Think about what changed. An update, a new app, a drop or an Odin flash each point to a different fix below.

Fixes, From Least to Most Invasive

1. Force a Restart

This does not delete anything.

  1. Press and hold Volume Down + Power (the Side key on newer models) for about 10 seconds.
  2. If the power menu appears, keep holding until the Samsung logo shows.
  3. If a Maintenance mode boot menu appears, use the volume keys to select Normal Boot and press the Power or Side key.

2. Start in Safe Mode

Safe mode turns off all downloaded apps. If the phone starts in Safe mode, an app is the likely cause.

  1. Switch the phone off, then switch it on.
  2. When the Samsung logo appears, press and hold Volume Down.
  3. “Safe mode” appears at the bottom left of the screen.
  4. Uninstall recently installed apps one at a time, and restart after each one to test.
  5. To leave Safe mode, hold the Power key and tap Restart.

If the phone reaches Safe mode, copy your photos and files to a PC or cloud storage now, before you try anything that erases data.

3. Stuck on the One UI 9 “Access Denied” Screen

SamMobile and Android Authority reported a user workaround that kept data: force a restart, hold Volume Down at the logo to enter Safe mode, turn on Airplane mode (or switch off Wi-Fi and mobile data), then restart normally. This is not an official Samsung fix. Android Police cautioned that going offline skips a verification step and could itself leave setup frozen, so use it with care and contact Samsung if it does not work.

4. Update or Repair the Software With Smart Switch

Smart Switch is Samsung’s free PC and Mac app. It can reinstall the official software without Odin.

  1. Install Smart Switch on a Windows PC or Mac and connect the phone with the original USB cable.
  2. If an update is available, select Update and follow the prompts. Do not disconnect the cable or use the phone until it finishes.
  3. If the phone shows the emergency recovery screen (a message that an error occurred while updating the device software), open MORE > Emergency Software Recovery and Initialization in Smart Switch, select your device and confirm.
  4. If it keeps failing, write down the emergency recovery code that Smart Switch shows. On a second computer, choose Emergency recovery using the recovery code and enter it.

If Smart Switch does not detect the phone, use MORE > Reinstall device driver, try another USB port and cable, or install the Samsung USB driver. Samsung’s guide does not say whether emergency recovery keeps your data.

5. Wipe the Cache Partition (Older One UI Only)

Samsung says this removes temporary system files without deleting personal data. Open the recovery menu with the phone switched off:

  • No Home key and no separate Power key (for example Note10, Fold and Z Flip): hold Volume Up + Side.
  • Bixby key (S8, S9, S10): hold Volume Up + Bixby + Power.
  • Home key (S6, S7): hold Volume Up + Home + Power.

Release the keys when the logo appears. Use the volume keys to choose Wipe cache partition, press Power, select Yes, then choose Reboot system now. Some owners report that on recent models the recovery menu only opens while a USB cable to a PC is connected.

With the One UI 8.5 updates, Samsung removed this option. 9to5Google reported in February 2026 that the recovery menu now shows only Reboot system now, Wipe data/factory reset and Power off. If you do not see the cache option, skip this step.

6. Factory Reset From Recovery (Erases Everything)

Warning: A factory reset erases all apps, photos and files on the phone. Anything not backed up is lost. After the reset, Google says you must sign in to your Google Account, so make sure you know the account and its password. Google also says a reset can take up to an hour.

  1. Open the recovery menu with the buttons in step 5.
  2. Select Wipe data/factory reset with the volume keys and press Power.
  3. Confirm the reset, then choose Reboot system now.

7. Reflash the Official Firmware With Odin (Advanced)

If the loop started after root, a custom ROM or a wrong firmware file, installing the official firmware for your exact model usually fixes it. Try the HOME_CSC file first, which is meant to keep your data. If the phone still loops, flash again with the normal CSC file, which wipes it. Our Odin flashing guide covers the full steps. On One UI 8.5 and later, Download mode may need Maintenance mode turned on first, which is only possible on a phone that can still start.

When It Is Hardware: Visit a Samsung Service Centre

Samsung says problems with the battery, charging port, SIM tray or display, and any liquid exposure, need a repair. Go to an authorised Samsung service centre if:

  • The phone still loops after a factory reset or a clean firmware flash.
  • The liquid damage indicator is pink, purple or red, or the phone was dropped before the problem started.
  • You cannot reach Safe mode, recovery or Download mode at all.

Use Samsung’s service centre finder for your country, for example India, Bangladesh or Pakistan. Take the bill if the phone is under warranty, and ask whether a software reload is possible before any board repair.

Related Guides

FAQ

What is the Normal Boot screen that appears after a forced restart?

It is the Maintenance mode boot menu. Samsung’s guide says to use the volume keys to select Normal Boot and press the Power or Side key to start the phone as usual.

Will fixing a Samsung stuck on the logo delete my data?

Not always. A forced restart, Safe mode, a Smart Switch update and wiping the cache partition do not erase personal data. A factory reset and an Odin flash with the normal CSC file erase everything.

Can I recover photos from a Galaxy stuck on the logo?

If the phone reaches Safe mode, copy your files then. If they were synced to Samsung Cloud, Google Photos or another cloud service, you can restore them after a reset. Files that were only on the phone are lost after a factory reset.

Why did my phone get stuck after a software update?

An update can fail or clash with an app or with leftover data. Try Safe mode and the Smart Switch update first. If many owners of the same model report the problem, Samsung may fix it in a later update, so check Samsung Members or your local Samsung support before you reset.

https://droid-developers.com/wp-content/uploads/2026/11/samsung-stuck-on-logo-fix-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/samsung-stuck-on-logo-fix-featured-150x150.jpgFahim MahmudHelp & TroubleshootingSamsung Stock RomSoftware FixIf your Samsung is stuck on the logo, the phone turns on but never gets past the Samsung or Galaxy logo, or it keeps restarting at that screen. Most cases are software problems you can fix without losing data: charge the phone, force a restart, pick Normal Boot, try...Android Help,Troubleshooting  & Stock Rom