Samsung Download mode, also called Odin mode, is a special start-up screen that lets a Windows PC write official firmware to a Galaxy phone or tablet. On current Galaxy models you enter it by switching the phone off, holding Volume Up + Volume Down and plugging in a USB cable that is connected to a PC. To leave it, hold Volume Down + Power for about 7 seconds. Older models use other buttons, and phones on One UI 8.5 or later may need Maintenance mode first.

What Download Mode Is

Download mode is where Odin, Samsung’s firmware flashing tool, talks to the phone. Odin only works when the phone is in this mode. You need it to flash official firmware with Odin, for example after a failed update or a boot loop.

Opening Download mode does not change or erase anything by itself. What happens to your data depends on the files you flash afterwards. It is also different from:

  • Recovery mode: a text menu with options such as Reboot system now and Wipe data/factory reset.
  • Safe mode: a normal start with downloaded apps turned off.

Requirements

  • A USB data cable and a PC. On current models, plugging in the cable is part of the button combination. Google notes that not all USB cables can transfer data, so use a good one.
  • Samsung USB driver on Windows. Install the Samsung Android USB Driver (v1.9.5.0, May 2026) so the PC can see the phone. See also our Samsung USB driver page.
  • Some battery charge. Charge the phone before you start, especially if you plan to flash firmware.
  • For One UI 8.5 and later: a phone that still starts normally and has a screen lock, so you can turn on Maintenance mode (see below).

How to Enter Download Mode

Pick the method that matches the buttons on your Galaxy.

Current Galaxy Phones and Tablets (No Home or Bixby Key)

This method is for models with only volume keys and a Side key, for example the Galaxy Note10, S20, Note20, S21, Tab S7 and Tab A7, and newer phones such as the Galaxy A56.

  1. Connect the USB cable to your PC, but not to the phone yet.
  2. Switch the phone off completely.
  3. Press and hold Volume Up + Volume Down together.
  4. While you hold both keys, plug the cable into the phone.
  5. When the blue Warning screen appears, release the keys.
  6. Press Volume Up once to continue. The Download mode screen opens and shows Downloading….

The Warning screen gives three choices:

  • Volume Up (short press): continue to Download mode.
  • Volume Down: cancel and restart the phone.
  • Volume Up (long press): Device unlock mode, on models that still allow bootloader unlocking. Do not choose this by accident. Unlocking the bootloader erases all data on the phone. Reports since July 2025 say the OEM unlocking option is missing on Galaxy phones with One UI 8, such as the Galaxy Z Fold7 and Z Flip7, so this option may not work on yours.

Galaxy S8, S9, S10, Note8 and Note9 (Bixby Key)

  1. Switch the phone off.
  2. Press and hold Volume Down + Bixby + Power.
  3. Release the keys when the blue Warning screen appears.
  4. Press Volume Up to continue.

Older Galaxy Models With a Home Button

This covers Galaxy models with a physical Home button, for example the Galaxy S7 and Note7.

  1. Switch the phone off.
  2. Press and hold Volume Down + Home + Power.
  3. Release the keys at the Warning screen and press Volume Up.

From a Working Phone With ADB

If the phone starts normally, you can use ADB from Google’s SDK Platform Tools. Turn on USB debugging in Developer options first, then run:

adb devices
adb reboot download

adb devices checks that the PC sees the phone. Tap Allow on the phone if it asks. adb reboot download restarts the phone straight into Download mode. The download target is specific to Samsung phones and is not listed in Google’s adb documentation. On recent One UI versions, Samsung’s Auto Blocker can block commands sent over a USB cable. You can switch it off in Settings > Security and privacy > Auto Blocker, and turn it back on when you are done.

One UI 8.5 and Later: Turn On Maintenance Mode First

In March 2026, Android Authority reported that on the Galaxy S26 series and Galaxy Z Fold7 with One UI 8.5, the button combination only showed a plain blue screen. The report was later updated: Download mode still works, but you must turn on Maintenance mode first. Owners of other models, such as the Galaxy A56, reported the same change after the March 2026 security patch, with a blue screen showing “Reboot Device” and an error code. Samsung has not explained the change, and community guides say it can vary by region.

  1. Back up your phone. Samsung recommends a backup before you use Maintenance mode.
  2. Open Settings > Device care > Maintenance mode (on some versions it sits under Additional care) and tap Turn on. You need a screen lock and some free storage: 1.5 GB on 64 GB phones, 500 MB on larger ones.
  3. Some guides say to switch off the Create log option on this screen before you start.
  4. Follow the prompts. The phone restarts in Maintenance mode.
  5. Switch the phone off, then use the Volume Up + Volume Down and USB cable method above.
  6. When you are finished, leave Maintenance mode from its notification or from Settings > Device care > Maintenance mode: tap Exit, then Restart, and enter your lock code.

This only works if the phone can still start. If it cannot, use Smart Switch emergency recovery on a PC or visit a Samsung service centre.

How to Exit Download Mode

  1. If Odin is flashing (a progress bar is moving), wait. Do not unplug the cable or force a restart until Odin shows PASS! or FAIL!.
  2. If nothing is flashing, press and hold Volume Down + Power (the Side key on newer phones) for about 7 seconds. The phone restarts normally.
  3. If you are still on the blue Warning screen, press Volume Down to cancel and restart.

If the phone returns to Download mode by itself, or shows an error about a failed software update, the software needs to be reinstalled. Use the Smart Switch Emergency Software Recovery and Initialization option or reflash the firmware with Odin, as described in our Odin flashing guide.

Troubleshooting

The Phone Restarts Normally Instead

  • Hold both volume keys before you plug in the cable, and keep holding them.
  • Connect the cable to a PC, not a wall charger. Try another cable and another USB port.
  • Make sure the phone was fully off, not just the screen.

Only a Blue Screen With “Reboot Device”

This is the One UI 8.5 restriction. Turn on Maintenance mode as shown above, then try again.

Odin Does Not Show “Added!!”

Reinstall the Samsung USB driver, restart the PC and try another USB port. If Windows shows a driver error code, see our Windows 11 USB driver guide.

Stuck on “Downloading… Do not turn off target”

If no flash is running, this is not a fault. Hold Volume Down + Power for about 7 seconds to restart. If the phone came here after a failed flash, it needs firmware again.

Related Guides

FAQ

Is Download mode the same as Odin mode?

Yes. Odin mode is another name for Samsung’s Download mode. Odin can only flash a phone that is in this mode.

Does entering Download mode delete my data?

No. Entering and leaving Download mode does not erase anything. Flashing firmware with the normal CSC file, or unlocking the bootloader from Device unlock mode, does erase the phone.

Can I enter Download mode without a computer?

On older models with a Home or Bixby key, yes, because the combination uses only buttons. On current models, the combination works when you plug in a USB cable while holding the volume keys, and a cable connected to a PC is the most reliable option.

Why does my Galaxy S26 only show a blue screen?

Since One UI 8.5, Galaxy phones such as the S26 series can need Maintenance mode turned on before Download mode opens. Turn it on from Device care, switch the phone off and use the button combination again.

Does Download mode work on a phone that will not start?

On older software, yes, as long as the phone switches off and the buttons work. On One UI 8.5 and later, you may not be able to turn on Maintenance mode, so try Smart Switch emergency recovery or a Samsung service centre.

https://droid-developers.com/wp-content/uploads/2026/11/samsung-download-mode-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/samsung-download-mode-featured-150x150.jpgFahim MahmudFlash ToolsHelp & TroubleshootingHow ToSamsung Download mode, also called Odin mode, is a special start-up screen that lets a Windows PC write official firmware to a Galaxy phone or tablet. On current Galaxy models you enter it by switching the phone off, holding Volume Up + Volume Down and plugging in a USB...Android Help,Troubleshooting  & Stock Rom