Samsung firmware CSC, explained simply: CSC is the file in a Galaxy firmware package that holds your country and carrier settings, and it is also the file that decides whether Odin wipes your phone. The other files are BL (bootloader), AP (the Android system) and CP (the modem). This guide explains what each file does, how to read your CSC code and build number, and how to pick the right files before you flash.

What Is in a Samsung Firmware Package?

Official Samsung firmware comes as a ZIP file. When you extract it, you normally get four or five files ending in .tar.md5: AP, BL, CP, CSC and HOME_CSC. Each one goes into the Odin button with the same name, except HOME_CSC, which also goes into the CSC button. Very old Galaxy models use a single file, which you load in AP.

File Odin button What it contains Wipes data?
BL_…tar.md5 BL Bootloader No
AP_…tar.md5 AP Android system partitions No
CP_…tar.md5 CP Modem (radio) firmware No
CSC_…tar.md5 CSC Country and carrier customisation, plus the partition table Yes
HOME_CSC_…tar.md5 CSC Country and carrier customisation Meant to keep data
USERDATA_…tar.md5 USERDATA Carrier apps and services (some carrier firmware only) Not documented

The file roles above follow XDA’s Samsung update guide. Older guides call the buttons PDA, Phone and UMS; these are today’s AP, CP and USERDATA.

BL: The Bootloader

BL updates the bootloader, the first code that runs when the phone starts. It carries the bootloader revision, which Odin checks. If the firmware has a lower revision than the phone, Odin refuses it, and you cannot easily go back to an older bootloader on Galaxy devices.

AP: The Android System

AP is a collection of the Android system partitions. That is why it is the file Magisk patches when you root your own Samsung phone: the Magisk project asks you to patch the AP file and flash it together with the original BL, CP and CSC files.

CP: The Modem

CP stands for Core Processor and holds the modem (radio) firmware used for the mobile network. Always use the CP file from the same firmware package as the other files.

CSC and HOME_CSC

Both contain the same country and carrier customisation. The difference is what happens to your data:

  • CSC completely wipes the data partition and internal storage. It also contains the PIT file, the table that tells Odin how the storage is divided into partitions.
  • HOME_CSC is meant to keep your apps, files and settings. Use it for an update or a repair where you want to keep data, but back up anyway.

Load one or the other in the CSC button, never both.

What Does CSC Mean?

According to SamMobile’s CSC guide (updated September 2026), CSC usually stands for Country Specific Code, while Samsung uses Consumer Software Customization in some enterprise documents. Every CSC is a three-letter code linked to a country, carrier or sales channel.

The CSC can affect:

  • network and APN settings
  • carrier features, menus and preinstalled carrier apps
  • languages and regional settings
  • some apps and services, such as Wi-Fi Calling, VoLTE, call recording and Samsung Wallet
  • when software and security updates arrive

The CSC does not change the hardware. It cannot add network bands that the phone was not built with.

Single and Multi-CSC Packages

Many phones use a multi-CSC package that holds settings for several countries or carriers. The phone runs the package but uses one active code inside it. For example, a line such as SAOMC_SM-S948B_OXM_INS means model SM-S948B, the OXM package, and INS (India) as the active code.

Package Used for
OXM International package used in many countries and regions
OYN US carrier package
OWO Latin America
OXE Older Eastern Europe and CIS package
OXX Europe, multiple markets

CSC Codes for South Asia

Country CSC codes listed by SamMobile
India INS (open market), INU (older devices)
Bangladesh BKD (some recent devices), BNG (other devices)
Pakistan PAK (open market), PKD (some recent devices)
Nepal NPB (recent devices), NPL (some older devices)
Sri Lanka SLK (open market)
UAE LYS, XSG (open market)

Before You Use These Files

Write down three things from your phone first:

  1. Model number: Settings > About phone, for example SM-S921B.
  2. CSC code: Settings > About phone > Software information > Service provider software version. The first code on the second line is generally the active one. On some phones, dialling *#1234# shows the AP, CP and CSC versions, but it may show the package (such as OXM) instead of the active code.
  3. Current build number: also under Software information. You need it to check the bootloader revision.

Also make a full backup. Our Android backup guide shows one way to do it.

How to Read a Samsung Build Number

The AP, BL, CP and CSC files carry the build number in their names. SamMobile’s guide uses S928BXXS4AYA1 (Galaxy S24 Ultra) as its example:

Part Meaning
S928 Device: S series, top tier, S24 generation, Ultra
B Market: international 5G
XX Variant: international/European
S Update type: S = security patch only, U = adds features
4 Bootloader revision
A Major version: starts at A and moves up with each major One UI update
Y Year: U = 2021, V = 2022, W = 2023, X = 2024, Y = 2025
A Month the build was finished: A = January
1 Build counter for that month

Following that sequence, 2026 builds use Z. For example, SamMobile reported S921BXXU6EZIF as the One UI 9 build for the Galaxy S24 in October 2026: bootloader 6, year Z, month I (September). After revision 9, the bootloader position uses letters, as in S721BXXUEEZIF for the Galaxy S24 FE.

SamMobile’s rule is simple: never apply firmware whose first seven characters do not match your current build (eight for US, FN and FG models).

How to Choose the Right Files

  1. Confirm the firmware is for your exact model. Never use firmware made for a different model number.
  2. Compare the bootloader revision (fifth character from the right) with your current build. Choose firmware with the same or a higher number.
  3. Pick the CSC that matches your phone’s region, ideally the same package your phone shows now.
  4. Decide on CSC or HOME_CSC: HOME_CSC to try to keep data, CSC for a clean install that wipes the phone.
  5. Load BL, AP, CP and your chosen CSC file from the same package. Leave the PIT tab and Re-Partition alone.
  6. Flash with Odin. Our Odin flashing guide has the full steps, including Download mode on One UI 8.5 and later.

Common Mistakes and Errors

The Phone Was Wiped After Flashing

The normal CSC file was used. It always wipes data. Next time use HOME_CSC if you want to keep data, and keep a backup either way.

SW REV CHECK FAIL in Odin

The BL file in that package has a lower bootloader revision than the phone. Download a build with the same or a higher revision.

Missing Features After Flashing Another Region’s Firmware

SamMobile warns that installing firmware for another country does not always change the active CSC, and that changing CSC can cause missing network features, update problems or region apps that stop working. Flash firmware for your own region unless you have a clear reason not to.

Wrong PIT or Re-Partition

Re-Partition wipes data, and using it with the wrong PIT file can semi-brick a phone. Leave it unticked unless you know you need it and have the correct PIT for your exact model.

Related Guides

FAQ

Does my CSC affect when I get updates?

Yes. SamMobile notes that Samsung releases firmware for specific combinations of model number, sales code and CSC package. That is why two phones with the same name can get an update on different days.

Can I change my phone’s CSC?

On some devices it is possible, but the methods are not supported on every phone and may erase all data. SamMobile does not recommend changing CSC only to get an update sooner.

Should I use CSC or HOME_CSC?

Use HOME_CSC when you want to keep your data, for example for an update. Use CSC for a clean install. When rooting with Magisk, its guide says to use CSC for the first install (because a wipe is required) and HOME_CSC for later upgrades.

Why is there no USERDATA file in my firmware?

USERDATA holds preinstalled carrier apps and services, so it appears only in some carrier firmware. If your package does not have it, leave that Odin button empty.

https://droid-developers.com/wp-content/uploads/2026/11/samsung-firmware-csc-explained-featured-1024x538.jpghttps://droid-developers.com/wp-content/uploads/2026/11/samsung-firmware-csc-explained-featured-150x150.jpgFahim MahmudFirmwareFlash ToolsSamsung Stock RomSamsung firmware CSC, explained simply: CSC is the file in a Galaxy firmware package that holds your country and carrier settings, and it is also the file that decides whether Odin wipes your phone. The other files are BL (bootloader), AP (the Android system) and CP (the modem). This...Android Help,Troubleshooting  & Stock Rom