OPPO A3s CPH1853 FIX RESTART CAM & FREEZING
1st World OPPO A3s CPH1853 REPAIR DONE
RECEIVED PHONE ON LAST UPDATE OF 25/07/2020 FREEZING WHEN MAKE OR RECEIVE CALLS & RESTARTING ON OPENING CAMERA
SOLUTTION WAS BY DOWNGRADE TO VERSION PATCH LEVEL 05/12/2019 VIA SRF FILE BY THE GIANT MEDUSA PRO
LOG INFO :
Code:
Welcome to Medusa Pro Software version 2.1.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Alcor Micro USB Smart Card Reader 3
Loading firmware. Please wait... Done.
Selected eMMC interface.
Selected PIN - CONNECTOR socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Oppo
Model : CPH1853
SRF : E:/FLASH TELEPHONE/eMMC PROJECTS/CPH1853/Oppo_CPH1853_eMMC_By_STARKRIMES.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5C7B7CAC7C525
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) C7B7CAC7
Manufacturing date : 12/2018
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/HAG4a2_27_09_2020_09_49_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.2; FW: 2.00.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: fsc (0003F828, 00000002) 1024 b
P09: ssd (0003F830, 00000010) 8 KB
P10: sbl1 (0003F840, 00000400) 512 KB
P11: rpm (0003FC40, 00000400) 512 KB
P12: tz (00040040, 00001000) 2048 KB
P13: devcfg (00041040, 00000200) 256 KB
P14: sbl1bak (00041240, 00000400) 512 KB
P15: rpmbak (00041640, 00000400) 512 KB
P16: tzbak (00041A40, 00001000) 2048 KB
P17: devcfgbak (00042A40, 00000200) 256 KB
P18: dsp (00042C40, 00008000) 16 MB
P19: DDR (0004C000, 00000040) 32 KB
P20: fsg (0004C040, 00002000) 4 MB
P21: sec (0004E040, 00000020) 16 KB
P22: aboot (0004E060, 00000800) 1024 KB
P23: abootbak (0004E860, 00000800) 1024 KB
P24: modem (0004F060, 00040000) 128 MB
P25: dtbo (0008F060, 00004000) 8 MB
P26: vbmeta (00093060, 00000080) 64 KB
P27: boot (000930E0, 00020000) 64 MB
P28: recovery (000B30E0, 00020000) 64 MB
P29: devinfo (000D30E0, 00000800) 1024 KB
P30: splash (000D4000, 00005800) 11 MB
P31: LOGO (000D9800, 00010000) 32 MB
P32: DRIVER (000E9800, 00010000) 32 MB
P33: cache (000F9800, 00080000) 256 MB
P34: misc (00179800, 00000800) 1024 KB
P35: keystore (0017A000, 00000400) 512 KB
P36: config (0017A400, 00000040) 32 KB
P37: log (0017A440, 00020000) 64 MB
P38: oem (0019A440, 00000800) 1024 KB
P39: limits (0019C000, 00000040) 32 KB
P40: mota (001A0000, 00000400) 512 KB
P41: dip (001A0400, 00000800) 1024 KB
P42: mdtp (001A0C00, 00010000) 32 MB
P43: syscfg (001B0C00, 00000400) 512 KB
P44: mcfg (001B1000, 00002000) 4 MB
P45: lksecapp (001B4000, 00000100) 128 KB
P46: cmnlib (001B4100, 00000800) 1024 KB
P47: cmnlib64 (001B4900, 00000800) 1024 KB
P48: keymaster (001B5100, 00000800) 1024 KB
P49: lksecappbak (001B5900, 00000100) 128 KB
P50: cmnlibbak (001B5A00, 00000800) 1024 KB
P51: cmnlib64bak (001B6200, 00000800) 1024 KB
P52: keymasterbak (001B6A00, 00000800) 1024 KB
P53: apdp (001B8000, 00000200) 256 KB
P54: msadp (001B8200, 00000200) 256 KB
P55: dpo (001B8400, 00000010) 8 KB
P56: logdump (001B8410, 00020000) 64 MB
P57: vm-kystore (001D8410, 00000800) 1024 KB
P58: vm-data (001D8C10, 00005000) 10 MB
P59: hyp (001E0000, 00004000) 8 MB
P60: vm-system (001E4000, 00020000) 64 MB
P61: vm-linux (00204000, 00010000) 32 MB
P62: system (00214000, 006B4800) 3433 MB
P63: vendor (008C8800, 0020FB00) 1055 MB
P64: userdata (00ADC000, 0127DFDF) 9.246 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_27_09_2020_09_49_09.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.2; FW: 2.00.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_27_09_2020_09_49_09.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.2; FW: 2.00.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/HAG4a2_fsg_0x4c040_0x2000_27_09_2020_09_49_09.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.1.2; FW: 2.00.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2179072
Number of sectors : 7030784
Build ID : OPM1.171019.026
Release ID : 8.1.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20200725.032959 release-keys
---------------------------------------------------------------
RPMB: Counter of the successful data write requests = 0.
https://droid-developers.com/oppo-a3s-cph1853-fix-restart-cam-freezing/Software Fix1st World OPPO A3s CPH1853 REPAIR DONERECEIVED PHONE ON LAST UPDATE OF 25/07/2020 FREEZING WHEN MAKE OR RECEIVE CALLS & RESTARTING ON OPENING CAMERA SOLUTTION WAS BY DOWNGRADE TO VERSION PATCH LEVEL 05/12/2019 VIA SRF FILE BY THE GIANT MEDUSA PRO LOG INFO : Code: Welcome to Medusa Pro Software version 2.1.2. Started. Reader #0: Alcor Micro...Fahim MahmudFahim Mahmud[email protected]AdministratorDroid-DevelopersFind out more at: https://medusabox.com/
Download Octoplus PRO JTAG V2.1.1 Software
Find out more at:
www.octoplusbox.com
Leave a Reply